This air suspension control valve is an original equipment manufacturer (OEM) solenoid valve from WABCO.
Can be installed in the following vehicles:
Audi A6/S6/Avant Quattro (1998 - 2001)
Audi A6/S6/Avant Quattro (2000 - 2004)
Audi A6/S6/Avant Quattro (2005) bis Fgstnr. >>4B-5-050 000
Audi A6/Avant C5 Typ 4B (1998-2001)
Audi A6/Avant C5 Typ 4B (2002-2004)
Audi A6/Avant C5 Typ 4B (2005) bis Fgstnr. >> 4B-5-050 000
Valve Block replaced with the spare part numbers:
Solenoid valve block
The dual valve controls the air flow between the left and right, and the height of your vehicle. This valve has been installed in many vehicles and represents the quality of the original valve. The advantage of this valve is the price. In addition, you can get inexpensive wear parts (eg solenoid, gasket). Installation is very simple.
The two hoses from the air bladder Coming to 0.5 cm cut straight (if long enough) to avoid Undichtikeit by aufgefranztem end.
Please insert the hose into the complete picture. She noted that the overcoming of a small resistance.
Please check the tightness after installation of the hoses to the recordings. To emphasize it a little soapy water with a brush on the shoot when the system is pressurized. It generates air bubbles when the intake is leaking.
-Much cheaper than authorized repair
-We as German provider have the European returns policy
-We also have a 2 years warranty
-Worldwide express delivery is our standard
-In Europe we have the longest experience with the topic of air suspension for automobiles in the after market.
Installation and expansion may only be carried out by trained personnel in a specialist workshop. Also note our installation instructions.
There are no reviews in the current language.