Choose your country of delivery to get the prices with the correct tax rates.
Choose tax zone / country of delivery
This is the original OEM AMK A2364 compressor (A6393200404) for the air suspension of the Mercedes Viano (W639, V639).It is manufactured according to the OE equivalent and is of the same fabrictaion. The Aftermarket`s first choice..Can be installed in the following vehicles: Mercedes-Benz Viano W639 (V639) 2003--Kombi 639.711, 639.713, Luxuskombi 639.811, 639.813, 639.815.Original spare part number of the air supply system:A6393200404, 6393200404 A6393200204, 6393200204 AMK A2364.Scope of delivery:Compressor - AMK - Made in GermanyParts of mounting kit OE #: A6393280081, 6393280081 .Before you buy a compressor please keep in mind that the main reason a compressor fails is because there is a leak in the Air Suspension System causing the compressor to overwork and "Burn Out". The most common cause for a leak in the system is an old leaky air spring bag. Your compressor warranty will be voided if air spring bags have not been recently replaced in your vehicle. We recommend that in order to maintain your Air Suspension System in optimal condition you purchase new air spring bags.Filter and suction hose should be changed in any case. For one, the suction is usually porous and brittle. Secondly, the filter should be replaced when the compressor is changed. Otherwise there is no factory warranty..Your advantage:-Made in Germany-Much cheaper than authorized repair-Personal advice-We as German provider have the European returns policy-We also have a 2 years warranty-Worldwide express delivery is our standard-In Europe we have the longest experience with the topic of air suspension for automobiles in the after market..Our technical advise for the air supply device:1. Increased noises while the compressor is running may be caused by a non-functioning compressor mounting. Change the rubbers and springs of the mounting in any case.2. A porous intake hose often is the cause for a breakdown of the compressor. Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.3. Be sure to check whether the system is leakproof after repairing.The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature.Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes. On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run..When driving with a leaking suspension for a long time it needs to be assumed that the compressor is running more often than normal. The increased number of cycles of powering on and off is likely to already have damaged the compressor. Depending on the duration of that condition you should change the relays and check the performance of the compressor to be on the safe side. After the vehicle stood overnight the compressor normally doesn't need to run more than 20 to 30 seconds for the system to be ready to start.
There are no reviews yet.