This control valve block A2123200358 for the air suspension of the Mercedes ML-Class W164 comes from the same production line as the original Mercedes valve.
If you don't want to compromise on quality & reliability, then Miessler Automotive Germany is your only aftermarket source for quality and reliable Air Suspension Control Valves.
DRIVING SAFETY, DAMPING POWER, FUEL CONSUMPTION
In your vehicle the integration of Air Suspension Systems, regulated damping, roll stabilization and other active suspension systems is becoming increasingly important.
Pneumatic and hydraulic valves are in use at key points of the chassis and ensure a smooth operation.
Can be installed in the following vehicles:
Mercedes-Benz ML-Class W164 (2005-2011)
ML 280 CDI 4-matic (164.120)
ML 300 4-matic (164.182)
ML 300 CDI 4-matic (164.121, 164.120)
ML 320 CDI 4-matic (164.124, 164.125, 164.122)
ML 350 (164.156)
ML 350 4-matic (164.186)
ML 350 CDI 4-matic (164.122, 164.125, 164.124)
ML 420 CDI 4-matic (164.128)
ML 450 CDI 4-matic (164.128)
ML 450 HYBRID 4MATIC (164.195)
ML 500 4-matic (164.172, 164.175)
Valve replaced with the spare part numbers:
Original OEM RAPA valve
Before using your old pressure hose, cut 5mm with the supplied hose cutter tool.
Use only the new connector that is already on the spare part. Push the presssure hose as far as it will go.
This will ensure a perfect seal.
- German quality management
- Much cheaper than authorized repair
- Personal advice
- We as German provider have the European returns policy
- We also have a 2 years warranty
- All shipping methods available
- In Europe, we have the longest experience with air suspension for automobiles in the aftermarket
Installation and expansion may only be carried out by trained personnel in a specialist workshop. Also note our installation instructions.
There are no reviews in the current language.