Choose your country of delivery to see prices and products for your location.
Choose tax zone / country of delivery
Front left Miessler Automotive® PROREMAN original Mercedes air spring strut (reconditioned) semiactive for VEHICLES WITH 4-Matic / WHEEL DRIVE (code M005) for the AIRMATIC Dual Control / air suspension (+ code 489)
This is a completely revised original suspension strut for the air suspension of the S-Class W221.
A professionally reconstructed automotive spare part for the pneumatic suspension.
A shock absorber with maximum efficiency.
The shock absorber is opened and provided with new wearing parts, gas and new special oil.
Can be installed in the following vehicles:
Mercedes-Benz S-Class 4Matic (W221) 2005-2013
S 250 CDI (221.003, 221.103) 2011/01-2013/12
S 320 CDI 4-matic (221.080, 221.180) 2005/10-2013/12
S 350 CDI 4-matic (221.080, 221.081) 2009/01-2010/12
S 350 CDI 4-matic (221.080, 221.180) 2009/06-2013/07
S 350 BlueTEC 4-matic (221.083, 221.183) 2011/04-2013/12
S 350 CGI 4-matic (221.082, 221.182) 2011/04-2013/12
S 350 4-matic (221.087, 221.187) 2008/02-2013/12
S 450 4-matic (221.084, 221.184) 2005/12-2013/12
S 500 CGI 4-matic (221.094, 221.194) 2011/03-2013/12
S 500 4-matic (221.086, 221.186) 2005/10-2013/12
Original spare part number:
A2213201738, A221320173889, A2213200438, A221320043889, A221320173838, A221320173880, A221320043838, A221320043880
A2213205313, A221320531338, A221320531380, A22132053133880
2213201738, 221320173889, 2213200438, 221320043889, 221320173838, 221320173880, 221320043838, 221320043880
2213205313, 221320531338, 221320531380, 22132053133880
Advantages why you are in good hands with Miessler Automotive® when it comes to air suspension:
The original Mercedes shock absorbers (for the air suspension) equipped with ADS (adaptive damping system), remanufactured by Miessler Automotive,
are of the highest quality and at the same time most cost-effective option compared to the remanufactured struts of other manufacturers.
Miessler Automotive 3S Air Suspension Module offers optimum safety and durability when remanufacturing original Mercedes Benz DampTronic® suspension struts
Our overhauled shock absorbers are all opened with special tools, equipped with new parts and Filled with new special oil and gas.
After this comprehensive remanufacturing process is complete, special equipment is used to subject each shock absorber to a load test.
This advanced equipment provides a thorough documented report with testing results to ensure every Air Strut meets quality conditions.
This ensures that every Shock Absorber leaving our facility has the same optimal efficiency.
At the end of the process you are left with technically a new Shock Absorber, equal in quality and performance as a new original shock absorber.
This process is the Miessler Automotive Difference. The compressive remanufacturing and testing process is not used by most remanufacturing companies.
Most refurbished shock absorbers offered by other companies are only freshly painted without replacing bad internal components.
By doing this It is easy to understand that a shock absorber which still contains old wearing parts, oil and gas is not a permanent alternative, and will most likely fail in a short period of time.
Other companies unfortunately are simply using used old shock absorbers that have seen thousands of miles over the years, without properly remanufacturing them.
Don't let your hard earned money go to waste by buying used parts not properly remanufactured. Only buy certified Miessler Automotive parts!
Trust in Miessler Automotive to get you back on the road!
- Installation and removal may only be carried out by trained personnel in a specialist workshop.
- Tools and equipment from the vehicle manufacturer are required for conversion.
- Check the suspension, wires and cables for damage and replace if necessary.
- Attention: If the conversion is carried out differently or in a different order than described in the vehicle manufacturer's manual,
damage to the vehicle and air suspension module may occur!