BMW X5 E70 E70N compressor air suspension 37206859714

BMW X5 E70 E70N compressor air suspension 37206859714

SKU: K004-AC03-0E70
Manufacturer: Miessler Automotive® - Own product
Origin: ISO / IATF certified manufacturer
Category: Air Supply / Compressors

More powerful compressor, therefore shorter response time including relay/closer for the electrical circuit of the compressor

249,00 €

incl. 19% VAT , free shipping to Germany (Paket)

MSRP: 982,00 €

(Save 74.64%, i.e. 733,00 €)

Choose tax zone / country of delivery

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)

TecDoc Catalog

Item

This compressor 37206859714 offer for the BMW X5 (E70, E70N) is characterized by a more powerful air compressor and a larger scope of delivery.
The advantage of this is the shorter running times, which leads to longer durability due to less wear and tear.
.
Since 2003, Miessler Automotive has been supplying air suspension spare parts for cars, SUVs and light commercial vehicles.
Based on this long experience, Miessler Automotive® developed this compressor with a significantly better technical performance range.
This premium product is produced in accordance with the requirements of the new quality management in the automotive industry IATF-16949 (formerly ISO/TS 16949:2009).

We would be happy to make you an offer for diagnosis and installation (repair) in our own vehicle workshop.
Please contact us by clicking on the button: “Question about the product”.

Can be installed in the following vehicles:
BMW E70 X5 2006-2013

Replaces compressors from the air supply system with the original spare part numbers:
37206859714, 37.20-6 859 714
37206799419, 37.20-6 799 419
37206789938, 37.20-6 789 938
37226785506, 37 22 6 785 506
37226775479, 37.22-6 775 479

Scope of delivery:
compressor
Relays (Tyco Electronics | TE Connectivity)

ATTENTION: Replacing the relay is mandatory, otherwise the warranty for the compressor will be void!

Important instructions:
A chafed or porous intake hose/intake rod will destroy the compressor.
A kinked suction hose will cause the compressor to overheat and then destroy it.
Leaking pipes, pipe connections or air bellows must be repaired, otherwise we cannot guarantee any guarantee.

Such requirements can be determined by us when a warranty or guarantee claim is requested.

Advantages:
- Documented quality assurance (Quality management in the automotive industry IATF-16949) by the manufacturer
- Final assembly* and additional final inspection is carried out at Miessler Automotive, Germany.
- Long-term tested (300h)
- Long-term corrosion test (720h salt spray according to DIN 50021-SS)
- Form and functional stability test at 110°C for 1h
- Suitable for operation at an ambient temperature of -40°C to 80°C (t<3 min. = 100°C)
- IP protection class: IP6K6/IP6K7K with attached contacting
*(required for certain models and air supply systems)
.
Basic advantages why you are in good hands with Miessler Automotive® when it comes to air suspension:
- We have been dealing with this issue since 2003
- Manufacturers selected by us are one of the pillars of the best quality
- Close cooperation with manufacturers in the area of quality management
- More and more own products that make repairing your vehicle easier
- Repair service in our own specialist workshop

Our technical advice for air supply:
1. An increased running noise of the compressor is often caused by the suspension of the compressor no longer functioning.
Be sure to also change the suspension rubbers and springs.
2. A porous intake hose is often the cause of compressor failure.
Change this and, ideally, the filter/noise damper at the same time.
We don't want the new compressor to fail prematurely for this reason.
3. After the repair, make sure that the system is absolutely tight.
The easiest way to determine this is to park the vehicle. Wait for the system to automatically readjust if your vehicle has this function. All heights that air supports must be precisely measured and noted from the ground to the bottom edge of the fender. The next day check and compare these heights.
Even a small deviation in the distances leads to long-term damage to the compressor and the valves.

If you have been driving for some time with a leaky undercarriage, it can be assumed that the compressor is running more often than normal. This increased number of on and off cycles may have already damaged the compressor. Depending on how long this condition has lasted, you should change the relay as a precaution and check the compressor's performance. After the car has been left overnight, a compressor should not run for more than 20 to 30 seconds until the system is ready to start again.

Placement on Vehicle:	center left outside
Type:	Compressor
Suitable for original spare part numbers:	37.20-6789938 6789938 37226785506 37.22-6785506 37206859714 6785506 37.20-6859714 37226775479 6859714 37.22-6775479 37206799419 6775479 37.20-6799419 6799419 37206789938
AMK-OES:	A1957
AMK-OEM:	A2018
Origin:	ISO / IATF certified manufacturer
Manufacturer:	Miessler Automotive® - Own product
Item condition:	New
Features:	100% Accuracy of Fit
Shipping weight:	5,00 kg

Before purchasing a compressor, please note the following:
Most common reasons for a defective compressor is a leak in the System and also a defective relay.
An excessive number of switch-on cycles will cause the relay contacts to stick together.
The result is continuous current on the compressor.
The compressor runs continuously without control until it burns out.

Another main reason why the compressor stops working is moisture inside the compressor.
This happens insidiously via leaks such as:
- Porous or damaged air springs or air spring parts (strut)
- Worn seals, defective compressed air connections and chafed compressed air hoses
- Leaking housings in components such as compressors, valves, air springs or struts.

Every air spring system is vulnerable in this way.
Therefore, follow our advice to avoid any further repairs in the near future.

Before a new compressor is installed, all the reasons why it has been damaged must be completely eliminated.

Our technical advise for the air supply device:
1. Change the relay before installing the compressor even if it seems to still work.
This is also a specification by the car manufacturer. Be sure to change the right relays.
Relays look similar, that is why there is a risk to change the wrong relays.
2. Be sure to check whether the system is leakproof after repairing.
The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature.
Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes.
On the day after measure these heights again and compare them with the ones before.
Even a small difference will lead to a damaged compressor and damaged valves in the long run.

When driving with a leaking suspension for a long time it needs to be assumed that the compressor is running more often than normal.
The increased number of cycles of powering on and off is likely to already have damaged the compressor.
Depending on the duration of that condition you should change the relay and check the performance of the compressor to be on the safe side.
After the vehicle stood overnight the compressor normally doesn't need to run more than 20 to 30 seconds for the system to be ready to start.

Contact data

Title

First name

Last name

Company - optional

E-Mail

Phone - optional

Question about item

Your question (Please state chassis number)

Assembly instructions

Assembly instructions